Posted on Leave a comment

310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739

AR style rifle with Collapsible butt stock on Gun Rack Mounting Bracket on a Massey Ferguson 1739

The MF 1739 does not have an enclosed cab or wind shield.

310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 15

Mounting on the ROPS and Fender
Because the ROPS does not line up directly above the fender you need to make an extension mounting frame. This will get the bracket more in line and level.

Because the ROPS does not line up directly above the fender you need to make an extension mounting frame. This will get the bracket more in line and level.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 16
You will want to place the mount on the right-hand side of the tractor. The bucket controls are on this side and you enter and exit the seat on the left side.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 17

You will want to place the mount on the right-hand side of the tractor. The bucket controls are on this side and you enter and exit the seat on the left side.

Using 1/8” X 2” flat aluminum bar, cut it to 18 inches.
Bend the bar at the 4” line, then the 5” line and again at the 4” and 5” lines. This will create a rectangle frame of 4” X 5”.
You can now aluminum weld the joint but it is not required as the bar is sufficiently stiff.

Bend the bar at the 4” line, then the 5” line and again at the 4” and 5” lines. This will create a rectangle frame of 4” X 5”.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 18

Next using the “310VT Effective Vehicle Transport Gun Rack Mounting Bracket“as a template mark out the four mounting holes on to one of the 4” sides. Drill out with a 3/8th” drill bit.

On the other 4” side, drill two 3/8th” holes equally spaced. These will be used to mount the frame to the ROPS.

On the other 4” side, drill two 3/8th” holes equally spaced. These will be used to mount the frame to the ROPS.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 19

Now straighten out and square up the frame.

Using “Self-Etching Aluminum” primer, paint the frame in two coats of paint.

Using “Self-Etching Aluminum” primer, paint the frame in two coats of paint.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 20

Using “Flat Black” paint, apply two coats of paint.

Using “Flat Black” paint, apply two coats of paint.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 21

Using 4 each number 8 x 12 ½” bolts mount the 310VT to the frame with the bolt heads on the side of the mount. Now use a number 8 split washer and nut, firmly attach the bracket to the frame.

Using 4 each number 8 x 12 ½” bolts mount the 310VT to the frame with the bolt heads on the side of the mount. Now use a number 8 split washer and nut, firmly attach the bracket to the frame.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 22

Mark the two ROPS mounting holes centered on the ROPS so that the TOP of the 310VT is 31” above the fender top.

Mark the two ROPS mounting holes centered on the ROPS so that the TOP of the 310VT is 31” above the fender top.
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 23

Drill the two mounting hole locations on the ROPS with 1/8th” drill. Using two number 10-16 ¾ self-tapping bolts mount the frame to the ROPS.

Once the mount and bracket are in place, install your rifle and mark the fender where the butt stockholder will sit.

image 22
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 24

Center the butt stockholder on the location marked out and fasten using a number 10-16 1/2 “ self-tapping bolt. Be careful not to get too tight or the bolt will go through the rubber holder.

Ruger American carbine length
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 25

Ruger American carbine length

Ruger mini-14
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 26

Ruger mini-14

image 13
310VT Effective Vehicle Transport Gun Rack Mounting Bracket on a Massey Ferguson 1739 27

AR style rifle with Collapsible butt stock

Posted on Leave a comment

Curved Glass Tractor Glass Gun Rack

Curved Glass Tractor Glass Gun Rack

I found the curved glass gun rack advertised online, just ordered 2 last week, installed them in my tractors on Saturday, makes carrying a firearm in the tractor so much nicer, I’m considering using some industrial grade Velcro to fasten it to the floor as the one tractor has some wire harnesses underneath where the rest needs to be fastened, making screwing it an invalid option, otherwise I love them. You will find two pictures attached, one from each tractor that I have them installed in. 
Adam, Hebron, North Dakota

Get your curved glass gun rack here

Curve Glass Tractor Glass Gun Rack
Posted on Leave a comment

Harvester Glass Mount Gun Rack Setup

Harvester Glass Mount Gun Rack in Queensland Australia

G’day Joe and Jesse,
I just received the glass mount gun grabber that I had ordered from you guys in the post yesterday. I fitted it up this morning before we went harvesting and I am very happy with the end result. It is an unreal product. It can get quite rough at times in the cab of the harvester (due to it being on steal tracks) but with the rifle in the gun grabber it did not move an inch all day. Please find attached some photos of it installed in our cane harvester. We are currently just over 50% of our way through the sugarcane harvest in Queensland, Australia.

 Thanks again for the great product,
Hayden Mathiasen

Grab your harvester glass mount gun rack here

Posted on Leave a comment

Customer Review of Glass & Cup Holder Gun Rack

maxresdefault 20

Joe interviews Danny for a customer review at his farm in North Western, Arkansas regarding his recent purchases and use of the glass mount gun rack and Polaris 1000 cup holder mount gun rack. Cup holder gun racks are in stock here.

The Gun Grabber Team.